Use and Care Manual

3
before itcools .
18.Switch OFF after use and unplug the unit from the socket.
19.Do not use the Wax melter outdoor. INDOOR USE ONLY
20.Do not overfill the Wax melter with wax, doing so can
lead tospillage as the wax heats up and expands.
21.Improper use of the Wax melrer may result in severe scalding.
22.Beware of hot steam when removing the lid.
23.Always ensure the lid is securely fitted whenever the wax
meltercontains wax.
24.Do not turn on or attempt to operate the wax melter when
the waxlevel is at or below the Min level.
25.Do not turn on the wax melter when the wax level is above
the Maxlevel. When the wax boils it will cause spillage.
26.If the wax melter should boil dry there is an overheat cut out
whichcan automatically reset. However repeated
overheating will eventually damage the heating element.
27.If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
28.Do not attempt to disassemble the wax melter. This will
void yourwarranty.
29.To avoid a plugged faucet, the remaining wax can not be
higher than the faucet when the power is cooling.
30.This machine is not suitable for jelly wax.
31.
This machine should not be operated by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience or knowledge,
unless they have been given supervision or instruction
concerning the safe use of theappliance by a person
responsible for their safety.
SAVE THESE INSTRUCTIONS