Instructions / Assembly
Table Of Contents
- DRYWALL SANDER
- OPERATING MANUAL
- Model: ZS180-DL
- 2.SPECIEICATIONS
- 3.SAFETY INSTRUCTIONS
- 4.GENERAL SAFETY RULES
- 5.PRECAUTIONA ON USING DRYWALL SANDER
- 6.HOW TO USE DRYWALL SANDER
- Before Initial Operation
- 6.1 How to Operate
- -- Insert the hose [1-1/1-2] into the dust access
- -- Tighten the side handle [1-3] by turning it ;
- 6.2 Electronic Control
- This machine has the characteristics as below：-- L
- -- Adjustable Speed [1-5]
- Adjust the speed from 1200-2300rpm by turning the
- Attention: Only install the specified sanding pad
- 6.8 Suction power adjustment [ 1-10 ]
- 7.Operate the Machine
- -- Do not control the machine’s head.
- 8.CARE AND MAINTENANCE
- If the supply cord is damaged,it must be replaced
- 10.LABELS ON YOUR TOOL (if any)
- 9 -
-- Adjustable Speed [1-5]
Adjust the speed from 1200-2300rpm by turning the speed wheel [1-5]. In
this way, user can choose different speed for different sanding surface.
6.3 Replace Sanding Pad [1-6]
-- Insert the hex wrench (size 5) into the hexagonal screw bolt on the
sanding pad
-- Hold the sanding pad firmly, and then turn the wrench to dismount the
pad.
-- Install new sanding pad by tightening the bolt
Attention: Only install the specified sanding pad on the machine.