Instructions / Assembly
Table Of Contents
- DRYWALL SANDER
- OPERATING MANUAL
- Model: ZS180-DL
- 2.SPECIEICATIONS
- 3.SAFETY INSTRUCTIONS
- 4.GENERAL SAFETY RULES
- 5.PRECAUTIONA ON USING DRYWALL SANDER
- 6.HOW TO USE DRYWALL SANDER
- Before Initial Operation
- 6.1 How to Operate
- -- Insert the hose [1-1/1-2] into the dust access
- -- Tighten the side handle [1-3] by turning it ;
- 6.2 Electronic Control
- This machine has the characteristics as below：-- L
- -- Adjustable Speed [1-5]
- Adjust the speed from 1200-2300rpm by turning the
- Attention: Only install the specified sanding pad
- 6.8 Suction power adjustment [ 1-10 ]
- 7.Operate the Machine
- -- Do not control the machine’s head.
- 8.CARE AND MAINTENANCE
- If the supply cord is damaged,it must be replaced
- 10.LABELS ON YOUR TOOL (if any)
- 10 -
6.4 Stick the Sanding Paper to the Pad [1-7]
Please ensure the holes on the sanding paper to fit the holes on the pad
accurately.
6.5 Two Options For Extracting Dust [1-8]
There are internal extraction and external extraction for dust particles. The
8-hole internal extraction system collects fine dust particles, enabling to
adhere to wall and ceiling, obtaining perfect effect of extracting dust.