Instructions / Assembly
Table Of Contents
- DRYWALL SANDER
- OPERATING MANUAL
- Model: ZS180-DL
- 2.SPECIEICATIONS
- 3.SAFETY INSTRUCTIONS
- 4.GENERAL SAFETY RULES
- 5.PRECAUTIONA ON USING DRYWALL SANDER
- 6.HOW TO USE DRYWALL SANDER
- Before Initial Operation
- 6.1 How to Operate
- -- Insert the hose [1-1/1-2] into the dust access
- -- Tighten the side handle [1-3] by turning it ;
- 6.2 Electronic Control
- This machine has the characteristics as below：-- L
- -- Adjustable Speed [1-5]
- Adjust the speed from 1200-2300rpm by turning the
- Attention: Only install the specified sanding pad
- 6.8 Suction power adjustment [ 1-10 ]
- 7.Operate the Machine
- -- Do not control the machine’s head.
- 8.CARE AND MAINTENANCE
- If the supply cord is damaged,it must be replaced
- 10.LABELS ON YOUR TOOL (if any)
- 11 -
6.6 Connect to Dust Bag
Dust bag has already connected to the hose.
Please ensure the dust bag to be cleaned in due time.
6.7 LED [ 1- 9 ]
LED light, 7W can work in a dark environment.
6.8 Suction power adjustment [ 1-10 ]
Detachable brush segment can reach up to the adjacent edge with ease.
7. Operate the Machine
-- Do not control the machine’s head.