Instructions / Assembly
Table Of Contents
- DRYWALL SANDER
- OPERATING MANUAL
- Model: ZS180-DL
- 2.SPECIEICATIONS
- 3.SAFETY INSTRUCTIONS
- 4.GENERAL SAFETY RULES
- 5.PRECAUTIONA ON USING DRYWALL SANDER
- 6.HOW TO USE DRYWALL SANDER
- Before Initial Operation
- 6.1 How to Operate
- -- Insert the hose [1-1/1-2] into the dust access
- -- Tighten the side handle [1-3] by turning it ;
- 6.2 Electronic Control
- This machine has the characteristics as below：-- L
- -- Adjustable Speed [1-5]
- Adjust the speed from 1200-2300rpm by turning the
- Attention: Only install the specified sanding pad
- 6.8 Suction power adjustment [ 1-10 ]
- 7.Operate the Machine
- -- Do not control the machine’s head.
- 8.CARE AND MAINTENANCE
- If the supply cord is damaged,it must be replaced
- 10.LABELS ON YOUR TOOL (if any)
- 2 -
1. PRODUCT DESCRIPTION
The machine is designed for sanding dry walls,ceilings and walls of the
inner and outer surface clearing the floor residues, paint coatings,
adhesive and loose plaster etc.
Our machine is not suitable for processing the object containing asbestos.
You must abide by certain safety precautions when using the
equipment. In order to prevent injuries and damages from
occurring, you must always read through this operating manual
carefully.
This manual must be kept in a safe place so that the information that it
contains is always available. This operating manual must accompany the
equipment if it is transferred to somebody else.
We do not accept any liability for accidents or damage arising from
ignoring this manual and the safety instructions.
2. SPECIEICATIONS
Model No.
ZS180-DL
Power
800W
No Load Speed
1200-2300 /min
Grinding pad diameter
7inch
Sandpaper diameter
190mm
Tube diameter
32mm
Weight
2.27kg
Protection class
/Ⅱ
3. SAFETY INSTRUCTIONS
The following pictograms appear throughout these operating instructions:
Indicates danger of injury, risk to life and possible damage to the
appliance if these instructions are not followed.
Indicates the presence of electric shocks.