Instructions / Assembly
Table Of Contents
- DRYWALL SANDER
- OPERATING MANUAL
- Model: ZS180-DL
- 2.SPECIEICATIONS
- 3.SAFETY INSTRUCTIONS
- 4.GENERAL SAFETY RULES
- 5.PRECAUTIONA ON USING DRYWALL SANDER
- 6.HOW TO USE DRYWALL SANDER
- Before Initial Operation
- 6.1 How to Operate
- -- Insert the hose [1-1/1-2] into the dust access
- -- Tighten the side handle [1-3] by turning it ;
- 6.2 Electronic Control
- This machine has the characteristics as below：-- L
- -- Adjustable Speed [1-5]
- Adjust the speed from 1200-2300rpm by turning the
- Attention: Only install the specified sanding pad
- 6.8 Suction power adjustment [ 1-10 ]
- 7.Operate the Machine
- -- Do not control the machine’s head.
- 8.CARE AND MAINTENANCE
- If the supply cord is damaged,it must be replaced
- 10.LABELS ON YOUR TOOL (if any)
- 6 -
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving
parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use.Many
accidents are caused by poorly maintained power tools. f)Keep cutting
tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the work
to be performed. Use of the power tool for operations different from those
intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
5. PRECAUTIONA ON USING DRYWALL SANDER
Attention! You must abide by the following basic safety measures against
electrical shocks, injuries and the danger of fire when using electric tools.
Read and abide by these instructions before you start to use any tools.
These instructions must be kept in a safe place.
-- The equipment must never be used in surroundings where an explosive
atmosphere exists. Do not let the cable touch any parts of your body.
-- Only use the extension cable approved for use in the working area.
-- Do not force the machine for unsuitable work, for example, rough
grinding, brushing, etc. Otherwise dangers and harms will be caused.
-- Only use identical replacement parts when servicing. Otherwise, risk-
free operation can't be guaranteed.