Important Safety Tips +Please read carefully and understand the following safety tips before using this product. «For your safety, please guarantee that this appliance always is plugged into a properly grounded circuit. «Do not cut or remove the third prong ( ground ) from the power plug or attempt to use a grounding adapter. Never immerse the machine in water. Always keep the machine away from any water source. Avoid splashing water into the device or the motor.
Ideal for pottery school, classroom and large-scale entertainment training center to make finished pottery crafts as well as the teaching ceramics, etc. Before the operation, please check whether the power supply voltage matches the specified voltage of the device. Place the pottery wheel on the dry & flat surface. Keep away from inflammable and explosive substances.
1.Insert the power plug into the 220V/110V power socket, turn on the black leakage protection switch, and wait for the power indicator to light up. 2 Turn the rotation switch (forward or backward) as you like. 3 Use the foot pedal to control speed, the working turntable will start to accelerate until it reaches working speed. During transportation, this product should be handled preciously to prevent violent vibration.
*When using the pottery machine, it is recommended to put an extra small water basin in the water basin {on the machine) to facilitate cleaning the clay on your hand. «During daily cleaning, use a dry cloth to wipe off the grease on the machine, don't flush it with water directly. «Pay attention to cleanliness and prevent the clay from entering the bearing, which affects the long-term use.
Pottery Wheel Machine Adrian Alloy Turntable One machine features two ways of speed control. You can push handle or foot pedal control speed. Manual Speed Control: push forward to accelerate, pull back » decelerate. Pedal Control Speed: step forward for acceleration, step back for deceleration. He peed CTV Pedal Forward | | Emergency Switch Stop Reverse Basic Parameters: Model Voltage Speed Tum table Size. Proctor Soe.
Pottery Wheel Machine Aluminum Alloy Turntable Pedal in the horizontal position means the fastest speed. Back pressure to 45 degrees is for the stop state, After speed fixed, you can lift your fot off the pedal. Basic Parameters: Mendel Voltage: Speed: “Turntable Size: Product Size: oe! Ww {rapidity Pottery Wheel Machine Aluminum Alloy Tum table This product 1s electric manual speed regulation. The speed can be adjusted by the knob on the front.
i Tl pot tet 10th pf o apn Dk I2MVEC Eng Hom cee ove on elt aes wih ss. as hat dad Era Sept a in A Soon eyeing at 0d Econ REP: PUREE Gm Underwritten 1a, 85051 Longstanding +49 841 8869 7744 B Website: wwwyevor.
