Instructions / Assembly

Check product SKU codes and sizes
Parts List
Product diagrams
Note: Product images are shown for display purposes only and may not be representative of the final
product.
Using Step
Step 1: Unpack the product and take it out. Place the retractable door in the position
where it needs to be used. Open the hinges, position them in the actual position on the
wall and punch the holes.
Step 2: Place the plastic expansion screws (Serial No.1 in the parts list) in the
perforated position, hold the door in place and fix it with the self-tapping screws (Serial
No.2 in the parts list).
Step 3: Pull the telescopic door into position and remove the wall fittings (Serial No. 4
in the Accessories List, positioned vertically, refer to the parts List for placement).
Step 4: Attach the clips on the side posts to the wall fixings and position them in a
sensible position and make the holes again. Place the expansion screws (Serial No. 3 in
the parts list) in the holes to fix the wall fittings to the wall.
Caution: Keep hands and fingers out of moving diamonds of web when handling gate.