Instructions / Assembly

- 7 -
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its
electrical outlet before performing any procedure in this section.
NOTE:
For additional information regarding the parts listed in the following
pages,refer to Parts List and Diagram.
Work piece and Work Area Set Up
 Designate a work area that is clean and well-lit. The work area must
not allow access by children or pets to prevent distraction and injury.
 There must not be drapes, paper or other forms of cloth nearby that
could be pulled into the inlet part of the ventilator obstructing air flow.
 Route the power cord along a safe route to reach the work area
without creating a tripping hazard or exposing the power cord to
possible damage. The power cord must reach the work area with
enough extra length to allow free movement while working.

To reduce the risk of fire or electric shock, do not use this Ventilator
with any solid-sate speed control device.
Flexible Duct Operation

Flexible air ducts can be folded or unfold, Unfolded length of 5 or 10
meters. (See the Fig.1.)
WARNING
Fig.1.