Use and Care Manual

- 11 -
4.preservation pre cooling key : In standby state, press the
“Preservation” button, the preservation indicator lights up, the buzzer
makes a short sound, the agitator motor, compressor, fan motor delay start,
the liquid crystal display shows the current value of the current agitator
motor.
5.Press the button and enter standby. In the refrigeration state, press
this key, after the completion of refrigeration, automatically enter the trough
pre-cooling function (only applicable to the model with this function)6)
timing/zero key in the standby state, click the key, enter the reset time set
state, then click the key, can change the reset time set value. Press the
button for 10 seconds and the cup count is zero.
6. the number of ice cream cups displayed: the number will be recorded
automatically for each ice cream extruded.
7.material level lack of material display (only applicable to the model with
this function) : lack of material in the cup number display area shows the
lack of material code and buzzer intermittent alarm.
CL
trough material shortage
8.alarm display
UH
High Voltage Alarm
UL
Low Voltage Alarm
JJ
Motor Overload Alarm
Sanitary and Parts Cleaning of Ice Cream Machine
1
）
Use hygienic raw materials, otherwise it may endanger health.
2
）
Do not return the ice cream that has been taken out to the tank,
otherwise it may be harmful to health.
3
）
For the operator of the ice cream machine, you must wash your hands
first and wear them neatly, otherwise it may endanger your health.
4
）
When using for the first time or not using it for a long time, please clean
the parts before using.