INSTRUCTION MANUAL
80FT Typeofonel i neas s embl i ng 40FT Typeofonel i neas s embl i ng 80FTTypeoft wol i ne par al l el das s embl i ng 40FTTypeoft wol i ne par al l el das s embl i ng
1 Wrap the rope of rachet around the treeļ¼Unlock the ratchet by pulling out the release lever.
3 4 Thread the loop buckles through the slackline. The webbing loop should face down after threading through the slackline. Make sure that the ratchet is positioned so that the handle is facing down and the ratchet is fully open (open slot on axle should be facing up). Feed the slackline through the bolt on the ratchet. Keep the line flat and not twisted. Pull through all the slack of the slack line, until the line is tight. Make sure that the line is not twisted.
5
1. Make sure all your connections are tight. 2. Do a mandatory load test on your line. Using either a 400 LBS (180kg) load or person,have them test the ninja line by suspending theweight 5 feet (152cm) from each end. 3. Keep your course clear Bystanders should maintain a safe distance from the line 10ft (3.1m)to prevent impacts by person's jumping down from the line.If you areunsure about your health for ninja line ,Please consult with your doctorbefore attempting.