a The user manual is a very important part of the the product, please Customer Service Mindy ~ Friday: 9:00 17:00 Tel : 609-755-4452 Mail: 2028.08.29.3.8 FACTORY Water-flowing Cube Ice Making Machine The exterior of the machine will be continuously adjusted for production optimization. The exterior used in this manual is for reference only.
Catalog Product Receiving and Inspection Product Model List tev van ven oal Installation and Placement of Machine Feet . .. Electric Safety sans 3 Water Supply System Installation Self-contained Machine Installation . . Application of drain UEP saa saa saran a5 Maintaining « «vv eee eae eee eee 6 Clean of Water Tank. Clean of Submersible Pump. aaa. oa. 7 LED Control Panel. awe. 8 LCD Control Panel.
Installation and Placement of Machine Feet Installation and placement of machine feet 1. Screw the machine feet underside the machine. Every machine foot must be installed tightly. Put the ice machine where flat and solid. 4. Adjust the feet height to make the ice machine horizontal. 5. The ice machine is not for outdoor use, please use it under ambient temperature 18°C ~38°C, and water temperature 5°C ~30°C, high temperature may decrease the ice output capacity.
Self-contained Machine Installation This picture is used for water connection of air-cooled machines 1.Drinking water: 1/2" male connector 2,Ice machine water intake: 3/4" external thread nylon connector (white) 3.
Maintaining Please perform maintenance and maintenance according to the requirements of this manual in order to improve the reliability and service rife of the ice maker, and avoid the increase in the energy consumption coefficient of ice production while maintaining hygiene. 1.Clean the environment around the ice machine frequently to keep it clean, and do not block the general blinds of the ice machine. 2.The shell can be cleaned with a neutral detergent, and then wiped with a soft cloth and water. 3.
1. LED Control Panel B= f= @ = ABBAS © [Power] can be used for short-term shutdown operation. [status] forced deicing button. Press this key during the ice making process (the ice making lamp is always on), and the program control can immediately change to the ice removal process. This function is often used for machine maintenance judgment.
Ice Making Working Process 5 > faience | Tce making Water =| ingress y Shatter = superstition Y forgiver ctl I 2 LCD Panel Running state ~~ Lad ol scull 3 [sv geese [oo B05 BIVOUACKED Water ingress Pressure balance Flushing program Hess B= BEEF BEE Pr-cooling Ice making operation Deicing operation 009 « 008 27% are rd MECCA [EYE EAF) BEI Water shortage High temperature Ice full standby shutdown shutdown OFF @ fig 2a (MECCA BEA Shutdown Appointment start Appointment time -insetting LCD Panel button Operation
LCD Panel Functions Operation A. Appointsent time B. Materway flushing steps OFF (POETIC 1. Turn off the machine and will display characters as above. + 200 (SECRET 2. Press the display will be showed in picture 2,default time 1s 2 hrs and sparkling. 3. Press each tine, the time will be lengthened by 18 minutes. Press each time, the time will be shorten by 10 minutes. The maxim reservation tine is 12 hrs. 4.
General Precautions . This appliance is suitable for the catering industry, such as kitchen areas in shops, offices or other workplaces; farms, hotels, motor hotels and residential environments, family hotel environments, catering and similar non-retail applications. 2. Do not store hazardous chemicals such as organic solvents and sprays in the appliance. 3. The machine installation failure must be replaced and repaired by the manufacturer or professionals.
Fault Code LED, LCD, panel| Panel Fault Fault Possible Cause Solution 2 1S Sec before awa, the Ge Erg ple Wl es bre 1. on-tang plate 15 wising or misplaced; 1. these the toe re nova late; Ice Full seconds; . 2. The polarity of the magnetic induction 2. Replace the ice removal plate/full ice savor; Eel 2. The ice removal plate Is not reset within 4 seconds aft ice removal; Schultz element is reversed; 3.
