Instructions / Assembly

22
2. Disconnect the probe from the measured circuit and remove the protective
leather case.
3. Loosen the screws fixing the back cover with a screwdriver and remove
the back cover.
4. Remove the damaged fuse tube and replace it with a new one.
5. Install the back cover, tighten the screws, and install the leather cover
Attention：
600mA fuse tube：600mA/600V；
10A fuse tube：10A/600V；
Warning
The fuse tube should be replaced with the same specification and
parameters, and it is strictly forbidden to use the fuse tube with different
specifications and parameters, otherwise there will be a risk of damaging the
instrument.