Instructions / Assembly

4
Safety symbol
Please refer to the instructions for important safety information
AC high voltage danger
Non-recyclable
The fuse must be replaced according to the designated specification in
the manual.
Safe operation specifications
Warning
To avoid possible electric shock or physical injury, please comply with the following
specifications:
· Before using the instrument, please read the manual carefully and use the
instrument in strict accordance with it, otherwise the protection provided by the
instrument may be reduced or invalid.
· Check the shell before using the instrument. Check whether there is crack or
plastic part defect. Please carefully check the insulator near the input terminal.
If the instrument works abnormally or is damaged, do not use it.
· It is forbidden to touch live conductors whose voltage exceeds 30V RMS AC, 42
V AC peak or 60V DC.
· The instrument should be used according to the specified measurement
category, voltage or current rating.
· When the indication of insufficient battery power is displayed, please replace the
battery in time to prevent measurement errors.
· Please comply with local and national safety specifications. Wear personal
protective equipment(approved rubber gloves, masks, flame retardant clothing,
etc.) to prevent injury caused by electric shock and arc when dangerous live
conductors are exposed.