Technical Support and E-Warranty Certificate www.vevor.com/support Instruction Manual GRINDER AND BELT SANDER COMBO We continue to be committed to provide you tools with competitive price. "Save Half ", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benef it from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
GRINDER AND BELT SANDER COMBO MODEL:TLGS825 NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
TABLE OF CONTENTS General Safety Instructions for Machines ............................................................... 3 Specific Safety Instructions..................................................................................... 4 Features ................................................................................................................. 5 Physical Features ................................................................................................... 6 Proper Grounding .........
GENERAL SAFETY INSTRUCTIONS FOR MACHINES Extreme caution should be used when operating all power tools. Know your power tool, be familiar with its operation, read through the owner’s manual and practice safe usage procedures at all times. ALWAYS read and understand the user manual before operating the machine. NEVER leave a tool unattended while it is in operation. NEVER allow unsupervised or untrained personnel to operate the machine CONNECT your machine ONLY to the matched and specific power source.
GRINDER AND BELT SANDER COMBO SPECIFIC SAFETY INSTRUCTIONS ALWAYS read and understand the user manual before operating the grinder. NEVER LEAVE the machine unattended while it is running. MAKE SURE to do a “ring test” on the grinding wheels before installation. Wheels that do not pass the test are not safe to use. See “page-11 for details. MAKE SURE you are wearing safety glasses while operating the grinder or sander. The small particles becoming airborne during operation can seriously damage your eyes.
GRINDER AND BELT SANDER COMBO FEATURES GRINDER AND BELT SANDER COMBO Following the instructions and procedures laid out in this user manual, you will receive years of excellent service and satisfaction. The machine is a professional tool and like all power tools, proper care and safety procedures should be adhered to. Motor ................................... .......... 120-Volts, Single Phase, 60-Hz No Load Speed.................... .......... 3600 RPM Amps ................................... ..........
GRINDER AND BELT SANDER COMBO PHYSICAL FEATURES Sanding Belt Belt Tracking Knob Work Lamp Eye Safety Shield Belt Cover Knob Belt Tension Lever Grinding Wheel Tool Rest Work Stop Base Dust Port ON/OFF Switch 6
PROPER GROUNDING Grounding provides a path of least resistance for electric current to reduce the risk of electric shock. It is strongly recommended not to use extension cords with your machine. Always try to position your machine close to the power source so that you do not need to use extension cords. Make sure the cord is plugged into a properly installed and grounded power outlet. To prevent electrical hazards, have a qualified electrician ensure that the line is properly wired.
UNPACKING Use bolts (not provided) that exceed the thickness of the base plus the thickness of the bench top and secure the machine to the workbench. The machine is properly packaged and shipped complete in a carton for safe transportation. When unpacking, carefully inspect the carton to ensure that nothing has been damaged during transit. Open the carton and check that the grinder and the parts are in good condition.
Adjust the tool rests 1/8” to 1/16” away from the belt and the wheel and tighten the screws. Figure-3 Installing the eye safety shield TOOL REST / WORK STOP Figure-4(1) Installing the tool rests The tool rest provides a surface that supports the tool during operation. The machine is provided with a tool rest for grinding and a work stop for belt sanding. BELT TRACKING Belt tracking means to adjust the belt so that it rides on, the center of the rollers and does not come in contact with the side covers.
Screws Belt tracking knob Figure-7 Loosening the screws Figure-5 Sanding belt tracking TEST RUN DUST PORT Once you have assembled the machine and verified that grinding wheel is secured and belt is tensioned and tracking properly, it is then time to do a test run and see that the machine powers up and runs properly. Machine features a 1-1/8” dust port located under the rollers. When connecting to a dust collector, use a proper sized hose and make sure all the connections are tightly sealed.
GRINDING WHEEL INSPECTION GRINDING WHEEL REPLACEMENT The machine comes with an 8” diameter, A60 grit aluminum oxide grinding wheel. The grinding wheel should be inspected properly before installation. To replace the grinding wheel: Make sure the switch is in the OFF position and the cord is disconnected from the power source. Clean the dust and/or dirt from the surface of the wheel and inspect it for any cracks, dents, chips, or any kind of external damage.
SANDING BELT REPLACEMENT Take the belt off the rollers and replace with a new one. To remove and replace the sanding belt: Make sure the switch is in the OFF position and the cord is disconnected from the power source. Move the belt tension lever down to tension the belt and reinstall the belt cover. Make sure to perform belt tracking adjustment on the when the new belt is installed. For details see “BELT TRACKING” page-9. Remove the belt guard by removing the knob securing the belt cover. See figure-10.
EXPLODED VIEW 13
PARTS LIST NO. Specification 1 Philips Screw 2 Left Guard Cover 3 I type Hex Nut 4 Wheel Flange 5 6 QTY NO. M5x42 2 45 1 46 Switch M16 left 1 47 Philips Screw 2 48 Rubber foot 4 1 49 Work rest 1 200x20x Wheel(60#) 15.
Technical Support and E-Warranty Certificate www.vevor.
