Technical Support and E-Warranty Certificate www.vevor.com/support INSTRUCTION MANUAL MODEL:HB6089-UL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
Commercial Blender MODEL:HB6089-UL NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Warning-To reduce the risk of injury, user must read instructions manual carefully. IMPORTANT SAFEGUARDS Before using the electrical appliance, the following basic precautions should always be followed including the following: 1. Read all instructions. Before using it, check that the voltage of the wall outlet corresponds to the one shown on the rating plate. 2. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner.
8. Do not operate the appliance for other than its intended use. 9. Avoid splashing the food into the vent holes of unit body during blending. 10. The blender must be used in a working environment that is far away from corrosive materials or oil pollution, and must be kept away from explosive and flammable materials. 11. The metal blades are extremely sharp Please handle it carefully. 12. Be careful of potential injury from misuse. 13.
-4-
TECHNICAL PARAMETER Tool length Rotating speed（Min） Rotating speed （Max） Working noise Model Input Rated Power HB6089 120V~ 60Hz 500W 12 inch 4000 RPM/Min 18000 RPM/Min ≤85dB （A） HB6089 AC220240V； 50Hz 500W 12 inch 4000 RPM/Min 18000 RPM/Min ≤85dB （A） HB6089 120V~ 60Hz 500W 20 inch 4000 RPM/Min 18000 RPM/Min ≤85dB （A） HB6089 AC220240V； 50Hz 500W 20 inch 4000 RPM/Min 18000 RPM/Min ≤85dB （A） HB6089 120V~ 60Hz 750W 12 inch 8000 RPM/Min 20000 RPM/Min ≤85dB （A） HB6089 A
ATTACHING AND DETACHING OF BLENDING ROD Before attaching and detaching operation, it must be ensured that the appliance stops working and its mains plug is unplugged. How to attach: 1. Insert the blending rod into the threaded inner hole of the unit body. When inserting, Align the slot of the connector with the ribs of the square aluminum cover to ensure that the connector is inserted in place. 2. Tighten the lock nut to fix the blending rod firmly onto the body.
IMPORTANT: Blades are very sharp; handle them with care. Ensure that the hand-held blender is unplugged from the power outlet before installing or removing attachments. OPERATION METHOD GETTING STARTED AND STOPPED 1. Check that the power button (3) is released. 2. Install the blending rod. 3. Connect the main unit to the power source. 4. Press the safety button (1) and proceed to the next step within 5s. If the unlocking fails after 5s, press the safety button (1) again. 5.
Continuous operation instruction After completing steps 1-5 above, proceed to the following steps: 1. Press the lock button (4) when the power button (3) is pressed down, and the red indicator lights up. 2. Release the power button (3) at this time, the hand blender will continue to work. 3. Press the power button (3) again, and the appliance stops, and the red indicator is turned off Speed adjusting instruction After completing steps 1-5 above, proceed to the following steps: 1.
REMOVAL/INSTALLATION OF BLADE ASSEMBLY 1. Align the blade assembly with wrench 1 and insert into it. 2. Align the blending head slot with wrench 2 and insert into it. 3. Unscrew clockwise to remove the blending rod. FAULT ANALYSI Fault Phenomenon Indicator light is not on Cause Analysis Exclusion Methods The power cord is not 1.Check the power cord to make plugged in. sure it is plugged in. 1.Long working hours, Indicator Light motor overheat 1.Wait an hour before reusing on Product protection.
Note: Above are common trouble analysis and troubleshooting methods. For other troubles, please contact our customer service department, or go directly to our designated repair point for repair. Do not dismantle and repair yourself.
Technical Support and E-Warranty Certificate www.vevor.
