Use and Care Manual
Table Of Contents
- Before using the electrical appliance, the followi
- 1.Read all instructions.
- 2.Do not operate any appliance with a damaged cord o
- 4. Always disconnect the blender from the supply i
- 5. Do not let cord hang over edge of table or hot
- 13.In the process of using the appliance, it is neces
- 14.Switch off the appliance and disconnect from suppl
- 15.Appliances can be used by persons with reduced
- 1. Insert the blending rod into the threaded inner
- 2. Tighten the lock nut to fix the blending rod fi
- USING YOUR BLENDER
- Before the first use, clean the blender according
- IMPORTANT: Blades are very sharp; handle them with
- Note:
- 2 -
Warning-To reduce the risk of injury, user must read instructions
manual carefully.
IMPORTANT SAFEGUARDS
Before using the electrical appliance, the following basic precautions should
always be followed including the following:
1. Read all instructions.
Before using it, check that the voltage of the wall outlet corresponds to the one
shown on the rating plate.
2. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Return
appliance to the nearest authorized service facility for examination, repair or
electrical or mechanical adjustment.
3.If the supply cord is damaged, it must be replaced by the manufacturer, an
authorized service agent, or a qualified technician to avoid a hazard.
4. Always disconnect the blender from the supply if left unattended before
assembling, disassembling, or cleaning.
5. Do not let cord hang over edge of table or hot surface. Be careful not to trip over
the long power cord when using the appliance.
Do not immerse the upper part of the blender in water, as this would give rise to
electric shock.
6. Avoid contacting moving parts.
7. Using accessories not recommended by the manufacturer may cause injuries
to persons.