Use and Care Manual
Table Of Contents
- Before using the electrical appliance, the followi
- 1.Read all instructions.
- 2.Do not operate any appliance with a damaged cord o
- 4. Always disconnect the blender from the supply i
- 5. Do not let cord hang over edge of table or hot
- 13.In the process of using the appliance, it is neces
- 14.Switch off the appliance and disconnect from suppl
- 15.Appliances can be used by persons with reduced
- 1. Insert the blending rod into the threaded inner
- 2. Tighten the lock nut to fix the blending rod fi
- USING YOUR BLENDER
- Before the first use, clean the blender according
- IMPORTANT: Blades are very sharp; handle them with
- Note:
- 6 -
ATTACHING AND DETACHING OF BLENDING ROD
Before attaching and detaching operation, it must be ensured that the
appliance stops working and its mains plug is unplugged.
How to attach:
1. Insert the blending rod into the threaded inner hole of the unit body. When
inserting, Align the slot of the connector with the ribs of the square aluminum cover
to ensure that the connector is inserted in place.
2. Tighten the lock nut to fix the blending rod firmly onto the body.
How to detach:
1. Loosen the lock nut.
2. Pull out the blending rod.
USING YOUR BLENDER
Before the first use, clean the blender according to the section of “QUICK
CLEANING”.
The time running unit without load can’t exceed 20s.
After the stirring rod is
assembled into place with the
main engine, rotate and
tighten the plastic parts, and it
is considered that the stirring
rod has been fixed.