Technical Support and E-Warranty Certificate www. vevor. com/support OIL FRYER FILTER MODEL: LYC-18L、LYC-18L-EU、LYC-38L LYC-38L-EU、LYC-55L、LYC-55L-EU We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
OIL FRYER FILTER LYC-18L、LYC-18L-EU LYC-55L、LYC-55L-EU LYC-38L、LYC-38L-EU NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www. vevor. com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
Warning-To reduce the risk of injury, user must read instructions manual carefully. Compliance is a EC security certification. CORRECT DISPOSAL This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol.
equipment. CAUTION：This equipment is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the equipment by a person responsible for their safety. CAUTION：Children should be supervised to avoid playing with the equipment.
VEVOR will not accept liability for product failures in the event that: • The instructions in this manual have not been followed correctly. • Unqualified personnel have adjusted the Fryer Frame. • Non-original spare parts are used. SAVE THESE INSTRUCTIONS PRODUCT PARAMETERS MODEL Voltage PLUG Tank filling capacity (MAX.
SETUP Remove the Oil Filter from the packaging, ensuring that all protective packaging, plastic and residues are cleaned from its surfaces. Lay out all components of the Oil Filter on the floor to ready for assembly. You will need an Allen key to assist in the assembly process. For Model LYC-18L、LYC-18L-EU： STEP 1: Assemble the oil gun to the main housing correctly as shown on the picture .
STEP 2: Put the filter paper,silicon seal ring into the pan,then the rectangular stainless steel frame to cover the silicone seal ring,then filter net and tighten the screws. Caution:It must be installed in the order shown in the figure, and the filter paper（A-2）must be installed on top of the filter(A-1), otherwise the machine may not work and be empty.
For Model LYC-38L、LYC-38L-EU、LYC-55L、LYC-55L-EU： STEP 1: Assemble the oil gun to the main housing correctly , as shown in the picture above.
STEP 2: Put the filter paper,silicon seal ring into the pan,then the rectangular stainless steel frame to cover the silicone seal ring,then filter net and tighten the screws. Caution:It must be installed in the order shown in the figure, and the filter paper（A-2）must be installed on top of the filter(A-1), otherwise the machine may not work and be empty.
USE CAUTION 1. Ensure that the filter paper is fresh and in place properly. Refer to instructions if you need to replace or install the filter paper. 2. Ensure that you have the filter machine plugged in and turned OFF,oil draining valve on the oil gun and main housing(Model LYC-38L LYC-38L-EU、LYC-55L、LYC-55L-EU) is in “OFF” position. 3. Open your fryer and attach the drain valve extension. 4. Position the front of the filter machine under the fryer drain valve extension. 5. Turn the fryer power switch OFF.
CLEANING & MAINTENANCE WARNING:SERIOUS INJURY OR PROPERTY DAMAGE CAN OCCUR IF PROPER PRECAUTIONS ARE NOT FOLLOWED • The power supply must be disconnected before servicing, maintaining, or cleaning this machine. • DO NOT pump water through the filter pump system. The pump functions using oil lubrication, and water will damage the pump. • DO NOT attempt to lift filter machine off floor for cleaning. Bodily injury may occur. • DO NOT attempt to circulate water through pump. Internal rusting in pump will occur.
DAILY CLEANING 1. Disconnect filter hose wand and drain. 2. Disconnect filter tube and turn pump on for 3-5 seconds to force shortening from pump. Failure to do this will cause pump or hose to clog with shortening. 3. Unplug shortening filter. 4. Remove filter tube and clamp assembly. 5. Unscrew wing nuts on filter clamp assembly to remove filter paper from filter plate. 6. Discard used paper; wash filter plate and thoroughly rinse with hot water; dry well. 7. Remove and wash tank. Rinse and dry thoroughly.
ELECTRICAL DIAGRAM TROUBLESHOOTING WARNING:SERIOUS INJURY OR PROPERTY DAMAGE CAN OCCUR IF PROPER PRECAUTIONS ARE NOT FOLLOWED • The power supply must be disconnected before servicing, maintaining, or cleaning this machine. • If the supplied power cord or receptacle is damaged, it MUST be replaced by an authorized service and parts company technician in order to avoid a hazard.
filtering process Pump starts and abruptly stops Pumping is erratic Oil is not being returned to fry pot Filter paper is dirty or incorrectly installed Tripped thermal overload switch Pump is blocked or wiring is loose Motor has failed Filter paper is incorrectly installed Filter hose connection is incorrectly installed The filter hose is clogged with debris Clogged filter paper Filter pan suction tube is blocked Turn filter pump off. Allow oil to cool, then empty pan.
Address：Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to USA: Sanven Technology Ltd.
Technical Support and E-Warranty Certificate www. vevor.
