Unit installation

27
Cable Storage and Cleats
Use the cable handle as your
cable storage and the tie-down
cleats on either side to keep it in
place and out of your way.
Transducer Holder
Store the transducer in the special holder
above the battery. The holder is designed to
accept all styles of Ice-Ducers.
Battery Compartment
To remove the battery, remove the flasher from
the carrying case, then the transducer holder
by removing the two mounting screws.
Easy Charge Jack
Charge the battery here. There is
no need to disconnect the battery
connections while charging.
Be sure to disconnect from
battery when putting the system
away for more than a week,
as the D-130 will drain your
battery.
Accessories
Use the pre-drilled
holes for Vexilar add-
on accessories, such
as the FlexLight, or
Tri-Beam Transducer.
See pages 45 - 47.
Eye-Bolt
Insert the transducer
support eye-bolt here,
the pack’s front or far
side. Be sure to remove
the float from the
transducer cable when
using the eye-bolt.