User Guide

u-center-User Guide
UBX-13005250 - R18

Production Information 5 u-center Menus and Windows
Page 25 of 67
5.1.5 Logfile toolbar
5.1.6 Action toolbar
5.1.7 Standard statusbar
The standard status bar is updated automatically and shows the information about the opened file, the connection
and the time. The following fields are available:
Status display: Displays the current action or the function of a button if the mouse cursor is over the button.
NTRIP client information: Shows the connection to an NTRIP caster (only when activated through Receiver ->
NTRIP Client...). Clicking on it will show up to 100 of the last errors between u-center and connected NTRIP caster.
NTRIP server information:Shows the status and number of clients currently connected to u-center's NTRIP
caster (only when activated through Receiver -> NTRIP Server/Caster...). Clicking on it will show up to 100 of the
last errors between u-center's NTRIP caster and connected clients.
DGNSS information: Shows the connection to a DGNSS source (only when activated through Receiver ->
Differential GNSS Interface...).
Receiver generation: u-center tries to automatically detect the type of device connected and activates the
appropriate mode of operation in order to take optimal advantage of the features. The mode can also be manually
selected through the menu bar (Receiver -> Generation).
Port information: Shows the active COM port and baud rate. Color coding of the icon:
Disconnected
Waiting for first data
Data is being received but errors are detected (mostly because of wrong baud rate settings)
Last data received was valid but there is no data to collect at this time
No data is being received but errors have been detected in the past
Data is being received and collected at the correct baud rate
File: The file opened in the u-center player.