User Guide
Table Of Contents
- Contents
- 1 Preface
- 2 Features
- 3 Getting Started
- 4 Concept and Philosophy
- 5 u-center Menus and Windows
- 5.1 Main frame and toolbars
- 5.2 Views and windows
- 6 NTRIP
- 7 Google Earth server
- 8 Tools
- 9 How To
- 10 Troubleshooting
- 11 Related Documents
- 12 Revision History
u-center-User Guide
UBX-13005250 - R18
Production Information 5 u-center Menus and Windows
Page 45 of 67
Function Description Shortcut /
Toolbar icon
Cursor The position of the cursor is shown on the lower left edge of the u-center screen
(Longitude, Latitude and Pixel-Position). By holding the left mouse button and moving the
cursor over the histogram you can measure distance from one position to another.
Move The histogram inside the histogram view window can be moved.
Zoom In Drawing a rectangle enlarges the histogram to the new view. To zoom in the histogram
double-click on the histogram.
Zoom Out Drawing a rectangle decreases the histogram to the new view. To zoom out the histogram
double-click on the histogram.
Drawing Mode The size and form of the displayed values can be changed in the menu points; the
connection line between the values can be selected in the menu connect. For viewing the
statically values (average, minimum, maximum, standard deviation) directly in the histogram
select the statistics menu.
Probability Fit the Probability range.
Fit Probability Fit the Probability range
Y value Select the Y value to be displayed.
Bins The number of bins.
Table 18: Description of the buttons in the histogram view toolbar
The number of displayed epochs is set to 1800 by default.
5.2.12 Camera view
The camera view function enables photographs, taken during recording of log files, to be linked to the GNSS
data stored in the corresponding log files. This allows a video depiction of the test, with a picture assigned to
a specific point of GNSS data.