User Guide
Table Of Contents
- Contents
- 1 Preface
- 2 Features
- 3 Getting Started
- 4 Concept and Philosophy
- 5 u-center Menus and Windows
- 5.1 Main frame and toolbars
- 5.2 Views and windows
- 6 NTRIP
- 7 Google Earth server
- 8 Tools
- 9 How To
- 10 Troubleshooting
- 11 Related Documents
- 12 Revision History
u-center-User Guide
UBX-13005250 - R18
Production Information 6 NTRIP
Page 53 of 67
10.Check "Get configuration automatically" to use longitude, latitude and RTCM message configuration of the
currently connected receiver that will be sent out on the mount point. In this case you can go directly to 16.
See position h.
11.Enter the longitude for the mount point in integer or floating point format. See position i.
12.Enter the latitude for the mount point in integer or floating point format. See position j.
13.Select RTCM messages that will be sent by the mount point. See position k.
14.For every selected RTCM message enter the period at which messages will be sent to the clients. See position l.
15.Check "Store configuration to receiver on exit" to store the configuration of RTCM messages to the receiver
(using the UBX-CFG-MSG message ). See position m.
16.Click on "OK" to start NTRIP server/caster.