User Guide
Table Of Contents
- Contents
- 1 Preface
- 2 Features
- 3 Getting Started
- 4 Concept and Philosophy
- 5 u-center Menus and Windows
- 5.1 Main frame and toolbars
- 5.2 Views and windows
- 6 NTRIP
- 7 Google Earth server
- 8 Tools
- 9 How To
- 10 Troubleshooting
- 11 Related Documents
- 12 Revision History
u-center-User Guide
UBX-13005250 - R18
Production Information 8 Tools
Page 58 of 67
Figure 53: Dump receiver diagnostics tool
8.4 GNSS configuration
u-center is capable of getting the actual configuration of a u-blox GNSS positioning chip or module and storing
it to an ASCII text file containing hexadecimal records. Such a file can be edited and stored to a u-blox GNSS
device again. By clicking the menu "Tools -> GNSS Configuration..." of u-center, the GNSS Configuration dialog
opens. The following functions are available:
• Specify the name of a new configuration file to store current configuration from the u-blox GNSS device
• Specify the name of an existing configuration file and load this configuration into the u-blox GNSS device
• A flag can be set to force storing the configuration into the Battery Backed RAM (BBR) or Flash.
Figure 54: GNSS configuration tool
8.4.1 Read/Write configuration files
1. Connect to the device.
2. Open Tools -> GNSS Configuration.
3. To read an existing configuration file, select the name of the file, then click on "File > GNSS" button. The
GNSS Configuration window then closes and the progress window pops up, showing the configuration being
sent to the receiver. This progress window closes after finishing the transfer without error.
Select "Store configuration into BBR/Flash" checkbox if the parameters need to be stored into the device's
non-volatile memory (BBR/Flash).