User Guide
Table Of Contents
- Contents
- 1 Preface
- 2 Features
- 3 Getting Started
- 4 Concept and Philosophy
- 5 u-center Menus and Windows
- 5.1 Main frame and toolbars
- 5.2 Views and windows
- 6 NTRIP
- 7 Google Earth server
- 8 Tools
- 9 How To
- 10 Troubleshooting
- 11 Related Documents
- 12 Revision History
u-center-User Guide
UBX-13005250 - R18
Production Information 9 How To
Page 60 of 67
9 How To
9.1 Change baud rate of receiver
1. Connect to the device.
2. Open View / Messages View (Hotkey: F9).
3. Select UBX-CFG-PRT.
4.
Poll the current configuration from the receiver ( ).
5. Change the setting to the desired baud rate.
6.
Send the message to the receiver ( ).
Figure 56: Changing baud rate (using UBX-CFG-PRT)
9.2 Save parameters to receiver non-volatile memory (BBR/Flash)
There are 2 ways to save parameters to the receiver's non-volatile memory (BBR/Flash).
9.2.1 Saving parameters with UBX-CFG-CFG
1. Connect to the device.
2. Open View / Messages View (Hotkey: F9).