User Guide
Table Of Contents
- Contents
- 1 Preface
- 2 Features
- 3 Getting Started
- 4 Concept and Philosophy
- 5 u-center Menus and Windows
- 5.1 Main frame and toolbars
- 5.2 Views and windows
- 6 NTRIP
- 7 Google Earth server
- 8 Tools
- 9 How To
- 10 Troubleshooting
- 11 Related Documents
- 12 Revision History
u-center-User Guide
UBX-13005250 - R18
Production Information 3 Getting Started
Page 9 of 67
3.4.2 Select the baud rate (only for COM ports)
Again in the communication toolbar, click on the arrow beside the icon. This will show a list with all available
baud rates (Figure 4). Select the correct baud rate on which the receiver is communicating (typically 9'600 baud).
If u-center is able to decode data from the receiver, the status bar begins to blink in green as shown in the
following icon: . This means that the connection is established successfully and the communication between
the receiver and u-center is working.
Figure 4: List of available baud rates
Now you are ready to use the receiver.