User Manual

ManualsBrandsVFAN ManualsAccessories & SuppliesUSB GPS Receiver Antenna Gmouse for Laptop PC Car Marine Navigation/Stratux/Raspberry Pi

USB GPS RECEIVER

----Quick guide

Please feel free to Email us if any problems，we will response it within 24 hours

vfan_sales@foxmail.com

Package contains

X1 USB GPS receiver

X1 CD-ROM

X1 User manual

NOTE: This is QUICK GUIDE only!

PLEASE

Read user guide carefully before installing.

u-center_UserGuide_(UBX-13005250).pdf

ucenter_ProductSummary_(UBX-13003929).pdf.

u-center-v8.29_ReleaseNotes_(UBX-18008967).pdf

You can copy these files from our CD-ROM or download from the link below:

Summary of content (5 pages)

PAGE 1
USB GPS RECEIVER ----Quick guide Please feel free to Email us if any problems，we will response it within 24 hours vfan_sales@foxmail.com Package contains X1 USB GPS receiver X1 CD-ROM X1 User manual NOTE: This is QUICK GUIDE only! PLEASE Read user guide carefully before installing. u-center_UserGuide_(UBX-13005250).pdf ucenter_ProductSummary_(UBX-13003929).pdf. u-center-v8.29_ReleaseNotes_(UBX-18008967).
PAGE 2
https://www.u-blox.com/en/product/u blox.com/en/product/u-center-windows windows Plug in the GPS receiver to your computer, computer download and install USB GPS receiver driver, named “u-center for windows, v8.29” v When you install the u-center center setup software, you can select install USB S Serial Driver or u-blox GNSS Sensor Device Driver. But it will be automatically install USB serial driver. There here are two methods to connect this GPS receiver to your computer.
PAGE 3
Step 2: Open the u-center center v8.29, Locate the communication toolbar and click on the arrow Select the beside the icon. This will show a list with all available COM ports. S corresponding COM port where the receiver is connected. If a link could be established, the icon will turn green and the text in the status bar changes from to . This does not mean that the communication already works but only that the port could be opened.
PAGE 4
PAGE 5
In case your laptop cannot recognized this GPS Receiver as a sensor or from COM Port in Device Manager, please delete the u-center, restart your laptop, and reinstall it again. when you place this GPS receiver in open area, and plug in your computer, the red LED is flashing after 30 to 60 seconds. it means this device got the GPS data from satellite and works well. Congratulations! This device works. please follow the user guide for more information.