User`s manual

Award BIOS Setup Utility
47
3
3.4 Selecting the Boot Sequence of the Drives
Sélection de la Séquence dAmorçage des Lecteurs
Bestimmen der Startreihenfolge der Laufwerke
Seleccionando la Secuencia de Inicio de las Unidades de Disco
1. Select Advanced BIOS Features in the main menu screen and press
<Enter>.
2. Select the drive to boot first, second and third in the First Boot Device
Second Boot Device and Third Boot Device fields respectively. The BIOS
will boot the operating system according to the sequence of the drive
selected. Set Boot Other Device to Enabled if you wish to boot from
another device.
1. Sélectionnez Advanced BIOS Features dans lécran de programme principal
et appuyez sur <Entrée>.
2. Sélectionnez le lecteur sur lequel amorcer en premier, en second et en
troisième dans les champs First Boot Device Second Boot Device et
Third Boot Device respectivement. Le BIOS amorcera le système
dexploitation en fonction de la séquence de lecteur sélectionnée. Positionnez
Boot Other Device sur Enabled si vous désirez amorcer à partir dun autre
périphérique.
1. Advanced BIOS Features in dem Hauptbildschirm auswählen, und die
Eingabetaste (Enter) drücken.
2. Im Feld First Boot Device Second Boot Device und Third Boot Device
wählen Sie jeweils das Gerät aus, das als erstes, zweites bzw. drittes geladen
werden soll. Das Betriebssystem wird durch das BIOS gemäß der
Reihenfolge des ausgewählten Laufwerks geladen. Stellen Sie Boot Other
Device auf Enabled, falls Sie von einem anderen Gerät aus laden möchten.
English
Français
Deutsch
The settings on the screen are for reference only. Your version may not be identical to this one.
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Advanced BIOS Features
Item Help
Menu Level
Allows you to choose
the VIRUS warning
feature for IDE Hard
Disk boot sector
protection. If this
function is enabled and
someone attempt to
write data into this
area, BIOS will show a
warning message on
screen and alarm beep
↑↓→← Move
F6:Fail-Safe Defaults F7:Optimized Defaults
F1:General HelpEnter:Select
F5:Previous Values
+/-/PU/PD:Value F10:Save ESC:Exit
X
X
Virus Warning
CPU L1 Cache
CPU L2 Cache
CPU L2 Cache ECC Checking
Processor Serial Number
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
OS Select For DRAM > 64MB
Video BIOS Shadow
Disabled
Enabled
Enabled
Enabled
Disabled
Enabled
Floppy
HDD-0
LS120
Enabled
Disabled
Disabled
Off
Fast
Disabled
6
250
Setup
Non-OS2
Enabled