Product specifications

CN333 Data Sheet
Revision 1.0, January 5, 2005 -30- Miscellaneous I/O and Configuration Space I/O
Miscellaneous I/O
One I/O port is defined: Port 22.
Port 22 – PCI / AGP Arbiter Disable ..............................RW
7-2 Reserved ........................................ always reads 0
1 AGP Arbiter Disable
0 Respond to GREQ# signal .....................default
1 Do not respond to GREQ# signal
0 PCI Arbiter Disable
0 Respond to all REQ# signals..................default
1 Do not respond to any REQ# signals,
including PREQ#
This port can be enabled for read/write access by setting bit-7
of Device 0 Configuration Register 78.
Configuration Space I/O
All North Bridge registers (listed above) are addressed via the
following configuration mechanism:
Mechanism #1
These ports respond only to double-word accesses. Byte or
word accesses will be passed on unchanged.
Port CFB-CF8 - Configuration Address......................... RW
31 Configuration Space Enable
0 Disabled................................................. default
1 Convert configuration data port writes to
configuration cycles on the PCI bus
30-24 Reserved ........................................always reads 0
23-16 PCI Bus Number
Used to choose a specific PCI bus in the system
15-11 Device Number
Used to choose a specific device in the system
(devices 0 and 1 are defined)
10-8 Function Number
Used to choose a specific function if the selected
device supports multiple functions (functions 0-4 and
7 are defined for device 0 but the function number is
unused / ignored for Device 1).
7-2 Register Number (also called the "Offset")
Used to select a specific DWORD in the
configuration space
1-0 Fixed ........................................always reads 0
Port CFF-CFC - Configuration Data.............................. RW
Refer to PCI Bus Specification Version 2.2 for further details
on operation of the above configuration registers.