User`s manual

Installation

Front Panel Audio Connector: F_AUDIO

This is an interface for the VIA front panel audio cable that allow convenient

connection and control of audio devices. By default, the pins labeled

LINE_OUT_R/NEXT_R and the pins LINE_OUT_L/NEXT_L are shorted with

jumper caps. Remove the caps only when you are connecting the front panel

audio cable.

Pin Signal Pin Signal

1 F_MIC1_L 2 AGND

3 F_MIC2_R 4 +5VAUDIO

5 LINE_OUT_R 6 NEXT_R

7 NC 8 Key

9 LINE_OUT_L 10 NEXT_L

Note:

If you don’t want to connect to the front audio header, pins 5 & 6, 9 & 10

have to be jumpered in order to have signal output directed to the rear

audio ports. Otherwise, the Line-Out connector on the back panel will not

function.

KBMS Connector: KBMS

The mainboard provides a PS/2 pin header to attach a PS/2 keyboard and

mouse.

Pin Signal Pin Signal

1 +5V Dual 2 GND

3 KB_CLK 4 KB_DATA

5 EKBCLK 6 EKBDATA

7 MS_CLK 8 MS_DATA

9 EMSCLK 10 EMSDATA

Note:

When the pin header is not in use, please short pin 3&5, pin 4&6, pin 7&9

and pin 8&10.

F_AUDIO

1 2

KBMS

1 2

109