User`s manual

Chapter 3
40
A DVANCED C HIPSET F EATURES
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
If there are display cards on
both AGP and PCI slots,
configure this item for BIOS to
select which one to boot
Item Help
Advanced Chipset Features
Phoenix - AwardBIOS CMOS Setup Utility
Display Card Priority
AGP & P2P Bridge Control
CPU & PCI Bus Control
Select Display Device
TV H/W Layout
TV Type
TV Output Connector
[PCI Slot]
[Press Enter]
[Press Enter]
[CRT]
[COMPOSITE+S-Video]
[NTSC]
[Press Enter]
AGP Driving Control
[Auto]
AGP Driving Value
DA
Panel Type
[07]
Caution:
The Advanced Chipset Features menu is used for optimizing the chipset
functions. Do not change these settings unless you are familiar with the
chipset.
Display Card Priority
This setting specifies which VGA card is your primary graphics adapter.
Settings: [PCI Slot and AGP]
AGP Driving Control
This item is used to signal driving current on AGP cards to auto or manual.
Always fix this setting to optimized default value unless you have problems
with special video cards
Settings: [Auto, Manual]
Select Display Device
This setting refers to the type of display being used with the system.
Settings: [CRT, TV, CRT + TV]