FWA7304 Series Network Appliance User′s Manual Version: 1.
Table of Contents Chapter 1 Introduction ................................................................................................................... 3 Chapter 2 System Specification ................................................................................................... 4 Chapter 3 Hardware Configuration.............................................................................................. 5 Chapter 4 Console Mode Information .................................................
Foreword To prevent damage to the system board, please handle it with care and follow the measures below, which are generally sufficient to protect your equipment from static electricity discharge: When handling the board, use a grounded wrist strap designed for static discharge elimination grounded to a metal object before removing the board from the antistatic bag. Handle the board by its edges only; do not touch its components, peripheral chips, memory modules or gold contacts.
Chapter 1 Introduction The FWA7304 series was specifically designed for the network security & management market.
Chapter 2 System Specification Processor VIA Eden V4 CPU, 1GHz L2 Cache: 128K Memory DDR2 So-DIMM x 1 Chipset Expansion slots Ethernet Front I/O VIA CN700 North Bridge Hardware Monitor Input Rating Power Supply Dimensions Voltage, Temperature, fan 32bit/33MHz Mini-PCI slot x 1 Realtek RTL8100C Fast Ethernet controllers x 4 , 10/100 Base-T USB 2.0 ports x 2 Power LED x 1 Status LED (GPO) x 2 , Alarm LED (GPO) x 2 , DC == 5V, 4A 20W power adaptor.
Chapter 3 Hardware Configuration CPU board layout Jumper Setting JBAT1: Clear CMOS Contents Use JBAT1, a 3-pin header, to clear the CMOS contents JBAT1 Setting Function Pin 1-2 Short/Closed Normal Pin 2-3 Short/Closed Clear CMOS JP3: HDD UDMA Selection JP4 Setting Pin 1-2 Short Pin 1-3 Short Pin 2-4 Short Function BIOS Detect Upper UDMA33 UDMA33 Only (Default) JP4: CF Card Master / Slave Selection JP4 Setting Function Pin 1-2 Master Short Pin 1-2 Slave Open FWA7304 Series User’s Manual 5
Chapter 4 Console Mode Information FWA7304 supports output information via Console in BIOS level. Prepare a computer as client loaded with an existing OS such Windows XP. Connect client computer and FWA7304 with NULL Modem cable. Follow the steps below to configure the Windows Hyper Terminal application setting: 1. For executing the Hyper Terminal, issue command “hypertrm”. 2. Customize your name for the new connection. 3. Choose the COM port on the client computer for the connection. 4.
5. Power up the FWA7304, and the screen will display the following information. 6. Press key to enter BIOS setup screen in Console mode. Press key to enter BIOS setup screen in VGA mode.
Chapter 5 Open the chassis 格式化: 項目符號及編號 1. Fig. 5-1 Loosen the four screws of the chassis on the back to remove the top lead. Fig. 5-2 The top lead (Fig. 5-2) can be removed from the base stand (Fig. 5-3). 格式化: 項目符號及編號 2. Fig.
Chapter 6 Removing and Installing CompactFlash Card 格式化: 項目符號及編號 1. Fig. 6-1 Compact Flash Card FWA7304 Series User’s Manual Fig.
Chapter 7 Fig. 7-1 Mini-PCI card. FWA7304 Series User’s Manual Installing Mini-PCI Card Fig. 7-2 Install the Mini-PCI card.
Chapter 8 Install 2.5” HDD Fig. 8-1 Fasten the four screws to lock HDD and bracket together. Fig. 8-2 Fasten the four stands-off to lock IB798. Blue portion for long stands-off. Red portion for short stands-off. Fig. 8-3 Connect IDE cable between 3.5” HDD and IB798. Fig.
Chapter 9 System Architecture The following block diagram illustrates a basic design reference of IB798, a highly integrated system solution.