User guide

ASUS K8V SE Deluxe motherboard

4-17

Memory Configuration

The Memory configuration menu item allows you to change the

memory settings. Select an item then press <Enter> to display the

sub-menu.

Memclock Mode [ Auto]

Allows you to set the memory clock mode. Set by the code using [Auto]

or select [Manual] to set using one of the standard values.

Configuration options: [Auto] [Limit]

Memclock to CPU Ratio [1:1 (DDR 200)]

Sets the memory clock to CPU ratio.

Configuration options: [1:1 (DDR 200)] [4:3 (DDR 266)] [3:2]

[5:3 (DDR 333)] [2:1 (DDR 400)]

Bank Interleaving [ Auto]

Sets whether to allow memory accesses to be spread out over BANKS

on the same node or across nodes, decreasing access contention.

Configuration options: [Auto] [Disabled]

CAS Latency (CL) [Auto]

Sets the CAS Latency. Configuration options: [Auto] [2.0] [3.0] [2.5]

Memory Configuration MEMCLK can be set

by the code using

Memclock Mode [Auto] AUTO, or if you use

Bank Interleaving [Auto] LIMIT, you can set

CAS Latency (CL) [Auto] one of the standard

TRC [Auto] values.

TRFC [Auto]

TRCD [Auto]

TWR [Auto]

TRWT [Auto]

TRAS [Auto]

TRP [Auto]

DDR Clock Delay [Auto]

Memory Configuration

ECC Configuration