User`s manual

Chapter 3

PS2KB Wakeup from suspend

Select which Hot-Key to wake-up the system from power saving mode.

Settings:

Disabled, Ctrl+F1, Ctrl+F2, Ctrl+F3, Ctrl+F4, Ctrl+F5, Ctrl+F6,

Ctrl+F7, Ctrl+F8, Ctrl+F9, Ctrl+F10, Ctrl+F11, Ctrl+F12, Power, Wake

and

Any Key

USB Resume

Decide whether or not USB devices can wake the system from suspend

state. Settings:

Disabled

and

Enabled

PowerOn by PCI Card

Decide whether or not any PCI card can power up the system or resume

from suspend state. Such PCI cards include LAN, onboard USB ports, etc.

Settings:

Disabled

and

Enabled

Wake On LAN/Ring Connector

Decide whether or not any Ring-In signals from the modem can wake up

the system or resume from suspend state. Settings:

Disabled

and

Enabled

RTC Alarm Resume

The field is used to enable or disable the feature of booting up the

system on a scheduled time/date. Settings:

Disabled

and

Enabled

Date (of Month)

This field can only be set if RTC Alarm Resume is enabled. The field

specifies the date for

RTC Alarm Resume.

Resume Time (hh:mm:ss)

This field can only be set if RTC Alarm Resume is enabled. The field

specifies the time for

RTC Alarm Resume.