User`s manual

Award BIOS Setup Utility

IDE HDD Block Mode

Enabled The IDE HDD uses the block mode. The system BIOS

will check the hard disk drive for the maximum block

size the system can transfer. The block size will depend

on the type of hard disk drive.

Disabled The IDE HDD uses the standard mode.

Onboard LAN Boot ROM (VIA P4X266-PE11-LA only)

By default, this field is disabled. Enable this field if you wish to use

the boot ROM (instead of a disk drive) to boot-up the system and

access the local area network directly.

If you wish to change the boot ROM’s settings, type the <Shift> and

<F10> keys simultaneously when prompted during boot-up. Take

note: you will be able to access the boot ROM’s program (by typing

<Shift> + <F10>) only when this field is enabled.