User`s manual

VCN700-LIC10/15

1.7.2 ATX Power Connector (ATX12V)

This connector is for an ATX power supply plugs. The power supply plugs are designed to

fit these connectors in only one orientation. Find the proper orientation and push down

firmly until the connectors completely fit.

Important notes on the Motherboard Power Requirements

 Make sure that your ATX 12V power supply can provide 8A on

the +12V lead and at least 1A on the +5-volt standby lead

(+5VSB). The minimum recommended wattage is 230W, or

300W for a fully configured system. The system can become

unstable and might experience difficulty powering up if the power

supply is inadequate.

 You must install a PSU with a higher power rating if you intend to

install additional devices.