User`s manual

User’s Manual
VCN700-LIC10/15 45
2.2.4.1 OnChip IDE Device
 On-Chip SATA
The chipset contains a SATA IDE interface with support for two IDE channels. Select
Enabled to activate the primary IDE interface (Channel0). Select Disabled to deactivate this
interface. The options: Disabled, Auto, Combined Mode, SATA Only.
 SATA Mode
Choose the interface of SATA controller. The default setting is “IDE” which let SATA like
parallel ATA controller. The “RAID” setting let SATA controller to support RAID.
The Advanced Host Controller Interface (AHCI) is a hardware mechanism that allows
software to communicate with SATA devices, such as hot-plugging and Native Command
Queuing (NCQ).
 IDE DMA Transfer Access
Use this field to enable or disable IDE DMA transfer access.
 On-Chip Primary / Secondary PCI IDE
The chipset contains a PCI IDE interface with support for two IDE channels. Select Enabled
to active the primary/secondary IDE interface. Select Disabled to deactivate this interface.
The options: [Enabled], [Disabled]