User`s manual

User’s Manual

VCN700-LIC10/15

2.2.8 Set Password

You can set password. It is able to enter/change the options of setup menus.

Follow these steps to change the password.

 Choose the “Set Password” option from the “Initial Setup Screen” menu and press

<Enter>. The screen displays the following message:

 Please Enter Your Password

 Press <Enter>.

 If the CMOS is good and this option has been used to change the default password,

the user is asked for the password stored in the CMOS. The screen displays the

following message:

Please Confirm Your Password

 Type the current password and press <Enter>.

 After pressing <Enter> (ROM password) or the current password (user-defined), you

can change the password stored in the CMOS. The password must be no longer than

eight (8) characters. Remember, to enable the password setting feature, you must first

select either “Setup” or “System” from the “Advanced BIOS Features” menu.