User's Manual

For more information on this and
other VIA products, please visit :
www.viatech.com/en/
6. SHP-D01 installation diagram
60 cm
Distance between
lens and subject
145 cm
Height between
lens and ground
Angle of view 60°
179.6 cm
69.2 cm
110.4 cm
6. Put the front plaque and plate back. Fix the
bottom with two M2 screws.
M2 screw
M2 screw
Note
NoteNote
Note:
::
:
1. Be careful of the orientation during
installation.
2. Please do not install any other device
close to the door station, keep at least 10 cm
of distance.
Assistant
Exposure
light
key
lens
RFID area
(within
rectangular
area )
4. Use M4 screw to fix the main part.
5. Distance between bottom of the door station
and the ground is 131 cm. Please consider the
thickness of the tile or marble.
131 cm
3. Remove two M2 screws from the bottom of
the plaque. Take off the plate in order to separate
the plaque and the main part.
M2 screw
M2 screw
plate
VIA Technologies, Inc.
VIA Technologies, Inc.VIA Technologies, Inc.
VIA Technologies, Inc.
1F, 531, Zhong-zheng Road,
Xindian District, New Taipei City
231, Taiwan
Tel: [phone]
Fax: [phone]
Copyright © 2015 VIA Technologies, Inc. All rights reserved.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause.
CAUTION! To prevent shock, do not remove cover. No user
serviceable parts inside. Refer servicing to qualified personnel.