User's Manual

Chapter 3
3-8
Advanced BIOS Features
OnBoard Voice Warning
If the Onboard Voice Warning feature is enabled, the mainboard will give human
voice warning though the speaker of any error during machine setup.
Examples: “VGA not installed”, “Keyboard not installed”, “Mouse not
installed”, “FDD not installed”, “HDD not installed”, “Memory not
installed”...etc. Settings: Disabled and Enabled.
Virus Warning
Set the Virus Warning feature for IDE Hard Disk boot sector protection. If the
function is enabled, any attempt to write data into this area will cause a beep
and a warning message will be displayed. Settings: Disabled and Enabled.
CPU L2 Cache ECC Checking
Set the ECC (Error-Correcting Code) feature for Level 2 cache. Facilitates error
detection/correction when data passes through Level 2 cache. Settings: Enabled
and Disabled.
Quick Power On Self Test
Shorten Power On Self Test (POST) cycle and enable shorter bootup time.
Allow BIOS to skip some check items during POST. Settings: Enabled and
Disabled.