User`s manual

User’s Manual 23
․Panel Type
ID No. Resolution Channel
0
640 x 480 1
1
800 x 600 1
2
1024 x 768 1
3
1280 x 768 1
4
1280 x 1024 2
5
1400 x 1050 2
6
1600 x 1200 2
7
1366 x 768<Optional> 1
If you apply one of the standard panels shown above, select the appropriate
option according to the type of panel that you apply. Or, please contact your
dealer or sales representative for custom-made BIOS that will suit the panel that
you apply.
CPU & PCI Bus Control
Item Available Options:
PCI Master 0 WS Write Enabled
PCI Delay Transaction Enabled
VLink mode selection Mode 1
VLink 8X Support Enabled
․PCI Master 0 WS Write
When enabled, up to four D words of data can be written to the PCI bus without
interrupting the CPU. When disabled, a write buffer is not used and the CPU
read cycle will not be completed until the PCI bus signals is ready to receive the
data.
․PCI Delay Transaction
The chipset has an embedded 32-bit posted write buffer to support delay
transaction cycles. Select Enabled to support compliance with PCI specification
version 2.2.
24 The ENDAT-3400M System Board
․V-Link mode selection
This menu item controls the data transfer speed between the north and south
bridge.
<Choice: By Auto, Mode 0~4>
․V-Link 8X Support
This setting controls the utilized widths of the V-link.
<Choice: Enabled, Disabled>
3-4. Integrated Peripherals
The IDE hard drive controllers support up to two separate hard drives. These drives
have a master/slave relationship that is determined by the cabling configuration
used to attach them to the controller. Your system supports two IDE controllers--a
primary and a secondary--so you can install up to four separate hard disks.
Integrated Peripherals
Item Available Options:
VIA OnChip IDE Device Press Enter
VIA OnChip PCI Device Press Enter
SuperIO Device Press Enter
Onboard Serial Port 3 3E8
Serial Port 3 Use IRQ IRQ5
Onboard Serial Port 4 2E8
Serial Port 4 Use IRQ IRQ5
Onboard Serial Port 5 4F8
Serial Port 5 Use IRQ IRQ5
Onboard Serial Port 6 4E8
Serial Port 6 Use IRQ IRQ5