User`s manual

3-11 Thermal Throttling Option

Miscellaneous Control

Item Help

CPU Thermal-Throttling Disabled

CPU Thermal-Throttling Temp 70

CPU Thermal-Throttling Duty 87.50%

Beep Alarm Enabled

Menu Level >

↑↓→←

Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

CPU Thermal Throttling Temp

This item allows you to activate the CPU Thermal Throttling function when the CPU

temperature is over the value which you set to low down the CPU temperature when at high

workload to protect processor from damage or accidental shutdown.

3-12 Power User Overclock Settings

Phoenix – AwardBIOS CMOS Setup Utility

Power User Overclock Settings

Item Help

Current FSB Frequency 200MHZ

Current DRAM Frequency 200MHZ

CPU Voltage at Next Boot Default

CPU Ratio at next boot Default

MEM Clock at Next Boot Auto

CPU Clock at next Boot 200MHZ

CPU Vcore 7-Shift Normal(Default)

VDIMM Select 2.55V (Default)

NBchip 1.2V Select 1.20 (Default)

SBChip 1.5V Select 1.50 (Default)

Menu Level >

↑↓→←

Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

CPU/DRAM Clock at next Boot is

This item allows you change the CPU Host /DRAM clock for overclock demand.

When the CPU

Host clock is over the CPU default value BIOS will auto disabled Bi-Turbo function

CPU Vcore 7-Shift

This item allows you select the CPU Vcore Voltage xx% more than the standard value, by

this function for the precise over-clocking for extra demanding of performance.

VDIMM Select

This item allows you to select 2.5V of the DDR Module. The choice are: 2.55V, 2.6V, 2.65V,

2.7V.