Technical information

15
Fig. no. 7 The boiler sheathing
4. To equip the side part with connecting spindles and pivots.
5. To mount on the anchor bolts the side covers parts. To screw with use of nut M10 (2 pcs) and washer
10, 5 (2 pcs) in the upper part the console of the side cover part on the anchor bolts.
6. To mount on the brace the consoles of brace with use of screws M5x12 (detail F). To screw the brace to
the side cover parts with use of 1 pc of the connecting spindle (on the left) an 1 pc of the screw M 5x12
(on the right). To screw into remaining openings 3 pcs of connecting spindles with washers 5,3.
7. To mount the console of cleaning covering with use of screw M 8x12 and washer 8,4 (detail E).
8. To screw up the right front upper part and the left front upper part with use of 2 pcs of screws M 5x12
(detail A). To locate into the front upper cover part the thermo – manometer. To screw up the
manometer capillary into the check- valve and to locate the thermometer capillary into the pit and to
secure it with the capillary spring.
The parts prepared in such way ought to be located on the pivots of the side cover parts and the lower
part ought to be secure with nut M10 which is located on the screw of the upper stocking door lug
(detail C).
9. To equip the left front cover part with 3 pcs of spring clips. To shift the cover part under the nut M 10
which is located on the screw of the upper stocking door lug (detail D) and to fit it on the connecting
spindles of the side cover part.
10. To equip the right front lower cover part with 3 pcs of the spring clips and to fit them on the spindles
located on brace and on the side cover part.
11. Into the right front cover part :
- To insert magnetic element and to secure it using the nut M4 (detail B).
- To insert handle
- To screw up 2 pcs of pivots
To fit the cover part completed in such way with pivots into openings in the upper right cover part and to
clip them up.
12. The mounting of the pull rod of the smoke control according to the Fig. no. 8. Need of single parts:
- 2 pcs keeper pins
- 2 pcs washers 10,5
- 1 pc nut M 10