User's Manual Part 1

Chapter 2 Managing Devices
Connecting a WiFi Advisor for the first time
WiFi Advisor Wireless LAN Analyzer User’s Guide
Page 12 22073751, Rev. 002 December 2014
Connecting a WiFi Advisor for the first time
Before any testing can begin, each WiFi Advisor must be paired with the iPad.
Pairing devices
1 On the iPad, select the Settings icon.
2 Verify that Bluetooth is set to On.
In the Devices section, the iPad detects and lists any devices within range.
3 Press and hold the blue button on the top of the WiFi Advisor for 5 seconds.
4 Verify that the blue LED on the WiFi Advisor is flashing slowly.
5 On the iPad, in the list of “My Devices”, select the WiFi Advisor with the serial
number of your WiFi Advisor.
6 Label your WiFi Advisor with the letter designator of your choice from the
sheet of ID Labels provided.
This label will be used during the registration process to provide a simple
method to identify test devices for use in the iOS application
When pairing is complete, the status of the WiFi Advisor(s) indicates “Connected”.
Registering and unregistering devices
After pairing the device(s) with the iPad, they must be registered with the WiFi
Advisor app, especially if this is the first time using this WiFi Advisor with this iPad.
To register WiFi Advisor devices with the iPad
1 From the WiFi Advisor app, select Device Management.
2 In the Unregistered Devices area, select the WiFi Advisor with the serial
number of your device.
3 Enter the label letter for the WiFi Advisor.
4 Repeat step 2 and step 3 for each WiFi Advisor.
The registered devices appear in the Device Manager screen.