User's Manual

RCATS Auxiliary Mobile Platform Quick Start Guide
Updated: 5 May 2009 JDSU Page 4 of 4
Step Action Result
2. Disconnect power, antenna, and
USB connections to the AMP.
—
3. Apply power to the probe. The probe automatically reactivates the internal module of
the letter designation that the AMP had assumed per Table 2.
FCC Compliance
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference and 2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
Contacting JDSU
If you need technical support, please contact JDSU RCATS Support:
E-mail—[e-mail]
Phone:
o Local—425-254-9925 (7–5, Mon–Fri, Pacific Time)
o Toll Free—888-352-9527 option 2 (any time)