Getting Started Guide

Chapter 2 Setting up the system
Connecting to a Wi-Fi network
ONA-800 Getting Started Guide
Page 14 22142812, R002 April 2020
3 Optionally, do any of the following:
– Enable or disable VNC access by selecting or deselecting, respectively, the
Enable VNC access check box.
– Enable or disable a password for VNC by selecting or deselecting,
respectively, the Require password for VNC access check box.
Connecting to a Wi-Fi network
1 Select System on the menu bar, and then select Network.
2 Select Wi-Fi, and then select the Enable Wireless Adapter check box to display
a list of available wireless networks.
3 Select a network, and then enter the access credentials.
Setting up a Bluetooth connection
1 Select System on the menu bar, and then select Bluetooth.
2 Enable the following check boxes:
– Enable Bluetooth
– Allow other devices to pair with this device
3 Optionally, enter a name for the unit.
4 Activate Bluetooth on the remote device to be paired with the unit.
5 On the unit, select Start Scanning to locate detectable devices in range.
The names of newly detected devices appear in the Discovered Devices, and
the names of previously detected devices appear in the Paired Devices list.
6 Select the remote device.
7 On the remote device, enter a pairing code if prompted, and then select Pair to
pair it with the unit.
NOTE
Wi-Fi connectivity is optionally available. Contact your VIAVI sales representative for
more information.
NOTE
Bluetooth connectivity is an option that must be available on the unit before this
procedure can be performed. Contact your VIAVI sales representative for more
information.