Getting Started Guide

Chapter 3 Smart Access Anywhere
Launching the utility
ONA-800 Getting Started Guide
Page 24 22142812, R002 April 2020
Smartphone with Data Tethering
You can remotely connect to a test instrument using a Smartphone capable of data teth-
ering and a WiFi hotspot or USB cable.
Figure 16 illustrates a test instrument connected to a workstation using a WiFi hotspot
provided by a Smartphone that supports data tethering.
Figure 17 illustrates a test instrument connected to a workstation using a USB connec-
tion to a Smartphone that supports data tethering.
Launching the utility
To use the Smart Access Anywhere utility, you must 1) establish a connect from your
PC or mobile device to the test instrument, 2) launch the utility on the test instrument to
obtain the required remote access code, and then 3) launch the utility on your PC or
mobile device, and enter the remote access code that was obtained from the instru-
ment.
Figure 16 WiFi Connection using Smartphone
Figure 17 USB Connection using Smartphone