Getting Started Guide

Chapter 3 Smart Access Anywhere
Launching the utility
ONA-800 Getting Started Guide
April 2020 22142812, R002 Page 25
Launching the utility on the instrument
To launch the utility on your instrument
1 On the System page, select Remote.
2 Press Connect next to the SmartAccess Anywhere icon.
The connection to SmartAccess Anywhere Server will initiate.
3 After a connection is established to the server, the instrument displays a message
with the code that is required to access to the equipment remotely.
4 If you will be accessing the instrument remotely from your workstation, write down
or capture the code in some manner so you have it when you return to your work-
station. If another individual will be accessing the instrument remotely, provide the
code to the individual.
Testing your connection
Before launching the utility on your workstation, you can also optionally test the connec-
tion between the workstation and target test instrument.
To test your connection
1 On your workstation, launch the Smart Access Anywhere utility.
2 Select Test connection.
The test automatically launches.
3 To display connection log details in real time, select the See full logs button.
The connection log appears, and provides the following information:
– Upload and Download speed (in Kbyte/s) from Device to server.
– Latency between Device and server (in ms).
4 After analyzing the results, do one of the following:
– Select the Clear test results button to delete the current table, and retest the
connection if desired.
– If connection is deemed to be valid, enter the access code and establish
connection.
Launching the utility on your PC or mobile device
After you establish a connection to your test instrument, you can launch the Smart
Access Anywhere utility to update your instrument.