User's Manual
Table Of Contents
- T-BERD ⁄ MTS 5800 Handheld Network Test Family Getting Started Manual
- Contents
- About this Manual
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 System Tools
- Chapter 4 Basic Testing
- Chapter 5 Optical Tools
- Chapter 6 Maintenance and Troubleshooting
- Appendix A Specifications
- Physical specifications
- Power specifications
- Supported electrical Ethernet rates
- Clock source (Timing) specifications
- DS1 specifications
- E1 specifications
- E3/DS3/STS-1 specifications
- E4/STM-1e specifications
- SFP specifications
- XFP specifications
- Optical specifications
- Transceiver specifications
- Environmental specifications
- Appendix B Storage and Shipment
- Appendix C Customer Services
- Glossary
Chapter 5 Optical Tools
Measuring optical power
T-BERD/MTS 5800 Getting Started Manual
85
3 Connect the microscope to the optical patch cord or bulk-
head.
The video of the fiber appears.
4 To view a live video feed, in the Microscope box, select
Capture, or use Freeze to stop the live feed.
5 Use Screen Layout to select Full screen (allows a larger
image for inspection) or Tile (allows comparison to saved
snapshots).
6 To change the Image Brightness or Contrast, move the
slider.
7 To save the results, do one of the following:
a Select Snapshot to save the frozen image as a .jpg.
b Select Save to save a PDF report. If desired, specify
the job ticket details such as the company name, tech-
nician, location, and job number. If the fields are left
blank, they will not be in included in the PDF report.
8 To compare the current results to previously saved
results, do the following:
a Select Tile as the Screen Layout
b Select Load and then choose the result file to load.
Select the Quit button to exit the test.
Measuring optical power
The Optical Power Meter is a JDSU accessory used to
measure optical power.
NOTE:
Although some microscopes can inspect multi-fiber or rib-
bon fiber (depending on the microscope and the tip used)
the T-BERD ⁄ MTS 5800’s microscope application sup-
ports simplex fiber only.