User's Manual
Table Of Contents
- T-BERD ⁄ MTS 5800 Handheld Network Test Family Getting Started Manual
- Contents
- About this Manual
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 System Tools
- Chapter 4 Basic Testing
- Chapter 5 Optical Tools
- Chapter 6 Maintenance and Troubleshooting
- Appendix A Specifications
- Physical specifications
- Power specifications
- Supported electrical Ethernet rates
- Clock source (Timing) specifications
- DS1 specifications
- E1 specifications
- E3/DS3/STS-1 specifications
- E4/STM-1e specifications
- SFP specifications
- XFP specifications
- Optical specifications
- Transceiver specifications
- Environmental specifications
- Appendix B Storage and Shipment
- Appendix C Customer Services
- Glossary
Appendix A Specifications
E4/STM-1e specifications
118 T-BERD/MTS 5800 Getting Started Manual
Physical
measurements
(STS-1 circuits)
Table 27 lists frequency and level measurement specifica-
tions when running STS-1 applications.
E4/STM-1e specifications
Refer to these tables for specifications for the E4/STM-1e
connector:
– Table 28 on page 119 through Table 30 on page 120 list
specifications for E4 receivers, transmitters, and
frequency and level measurements.
– Table 31 on page 120 through Table 33 on page 121 list
specifications for STM-1 receivers, transmitters, and
frequency and level measurements.
Table 27 STS-1 frequency and level measurement specifications
Parameter Specification
Tx and Rx
frequency
Range: 51.84 MHz ±50 ppm
Accuracy: ±1.5 ppm, ±1 ppm per year aging
Resolution: 1 Hz or 1 ppm
Level Vp Range: 1.6 V to 0.01 V
Resolution: 0.01 V
Accuracy: ±0.02 V ±10%